When it comes to artificial tree lights, it is not easy for everyone to be unfamiliar. With the development trend of the technology industry, artificial trees are slowly integrated into our daily life, whether it is on the street, on the street, or in the garden of tourist attractions. A variety of artificial trees are inevitable. Every simulation tree is done well and beautifully, so the brand image is real. I don't know if I don't get close and touch it, and I don't know that it was made by simulation, and it looks exactly like a real tree. So, what kind of raw material is the simulation tree made of, and why is it so real?
The raw materials of artificial trees are roughly divided into the following five types: 1. PE environmental protection plastics. 2. Moisture-proof oily cloth. 3. Plastic coated steel wire. 4. Construction steel bars. 5. FRP anticorrosion, etc.
1. PE environmental protection plastic
The use of PE environmental protection plastic can make the leaves of the artificial tree into a spacious and straight appearance, highlighting the plumpness and attractiveness of the petiole, and the glued leaves also feel fleshy to the touch.
2. Moisture-proof oily cloth
Moisture-proof oily cloth is an indispensable raw material for making artificial tree leaves. The oily cloth is used for several times of glue, and the holes of the cloth are densely coated, punched into the shape of a leaf, and the original granular plastic of PE is injection-molded on the leaf at a high temperature of 200 degrees, and the high-temperature glue is miscible with the leaf.
3. Plastic-coated steel branches
It is used to make the size bones of artificial tree leaves. There are 3-6 steel branches (depending on length) of different sizes, 16CM or 19CM (depending on length) hot-dip galvanized steel pipes in the blade rods. The ossicles have a small steel branch. The close combination of leaf bones and leaves can prevent the leaves from falling off for ten years!
4. Construction steel bars
The building steel bar is in the middle of the glass fiber reinforced plastic anti-corrosion thickness, and has the impact force of the main pole at the supporting point, which is resistant to working pressure. The connection of the leaf is welded on the top of the building steel bar in the middle of the glass fiber reinforced plastic anti-corrosion, and bears the net weight of the blade. The impact force of the rod, the steel bar at the bottom end is mechanically connected to the stainless steel plate at the bottom end, which has the effect of installation safety.
5. Glass fiber reinforced plastic anti-corrosion
FRP anti-corrosion is the raw material of glass fiber improvement. It is a kind of raw material that cannot be used to make the main pole of artificial tree. It has many advantages such as light weight, high strength, anti-corrosion, heat insulation, insulation layer, sound insulation and noise reduction.
